Market scope and exact product configurations
The Husqvarna source is titled “115iHD55 (battery and charger included)” and shows the US/Canada kit 967 09 86-06 with a 36V, 4.0 Ah BLi22 battery and QC 80 charger. Husqvarna also lists tool-only variants under the 115iHD55 name. A retailer title or photograph alone does not prove which battery, charger or SKU is in a particular box.
Bosch DIY Spain lists AdvancedHedgeCut 36V-65-28 under order number 060084A301 without a battery or charger. The manufacturer also describes a separate kit, 060084A300, with a 2.0 Ah battery and charger. These are distinct packages, so compare their total costs rather than assuming the tool name defines a bundle.
The exact references let readers compare documented dimensions, but they do not make the configurations regionally equivalent. Availability, warranty, repair access, included accessories and battery costs depend on the country. The US/Canada Husqvarna page does not establish a Spanish or UK kit; the Bosch Spain page is a bare-tool specification and does not establish which battery package a local retailer currently supplies.
Official specifications for both models
| Published detail | Husqvarna 115iHD55, US/Canada kit | Bosch AdvancedHedgeCut 36V-65-28, Spain |
|---|---|---|
| Battery platform | BLi-X 36V | 36V POWER FOR ALL |
| Blade/cutting length | 22 in (55.9 cm) | 65 cm |
| Tooth gap | 0.63 in (about 16 mm), on Husqvarna support page | 30 mm |
| Maximum cutting diameter | No comparable maximum is used from the cited source | 28 mm in Bosch manual/product documentation |
| Published weight | 7.3 lb (about 3.3 kg), excluding battery | 3.5 kg with 2.0 Ah battery; up to 4.8 kg with 4.0 Ah, per manual |
| Configuration | US/Canada kit with 4.0 Ah battery and QC 80 charger | 060084A301 bare tool; separate 060084A300 kit exists |
| No-load cutting rate | 3,000 cuts/min, on support specifications | 3,200 cuts/min |
The manufacturer values use different units and package assumptions. Bosch’s blade is about 9 cm longer, but that does not establish a faster or cleaner cut. Its 30 mm tooth gap is not the same measurement as its listed maximum cut diameter. Husqvarna’s support page provides a tooth gap; we do not turn that into a maximum branch diameter because the cited source does not publish an equivalent limit.
Cutting length, tooth gap and branch diameter
A 65 cm bar can cover more length per pass along an accessible straight hedge. A roughly 56 cm bar may be easier to position around corners, small shrubs and tight access, although balance, handle shape and complete-tool weight matter just as much. A longer blade does not automatically mean safer reach or better control. The operator needs a stable stance and clear sight of both ends of the cutting bar.
Bosch specifies a 30 mm tooth opening and describes cutting branches up to 28 mm for this model. Those are product-specific figures, not permission to force any hardwood of that diameter through the blades. Species, moisture, branch position and blade condition change the load. Use loppers or a pruning saw for dry or structural branches that exceed the hedge trimmer’s intended work.
Husqvarna support lists a 0.63-inch tooth gap for the 115iHD55. That measurement should not be presented as its maximum branch capacity or directly equated to Bosch’s stated cutting diameter. If branch size is decisive, request the operating manual for the exact Husqvarna SKU and confirm the permissible cutting material and limits before purchase.
Battery systems, kits and working weight
The battery platforms are separate. Bosch identifies POWER FOR ALL 36V, while Husqvarna identifies BLi-X 36V. Do not share batteries or chargers based only on the voltage marking. Connector shape, electronics and manufacturer compatibility lists determine what fits and operates safely. If you already own packs, check the exact platform and tool compatibility page before calculating savings.
Weight comparisons also need the same setup. Husqvarna publishes 7.3 lb excluding its battery. Bosch’s Spanish product page lists 3.5 kg with a 2.0 Ah battery; its manual gives a range from 3.5 kg with 2.0 Ah to 4.8 kg with 4.0 Ah. The load held during use is the complete tool, not the shipping carton or bare-tool number. Account for the selected pack, guard and any optional accessories.
Bosch advertises up to 260 m² per charge, a manufacturer estimate under its own conditions. It is not a universal runtime or a guarantee for every hedge. Growth density, plant species, cutting frequency, temperature and pack condition all change the work. The Husqvarna source used here does not provide a comparable area-per-charge figure, so the pages cannot support a runtime ranking.
What to verify before choosing
- Find each model’s exact local SKU and confirm the plate, package and manufacturer page match.
- Check whether the offer is tool-only or includes a battery and charger. Bosch 060084A301 is the bare-tool reference; 060084A300 is the cited kit.
- Ask Husqvarna for an equivalent local configuration and confirm warranty, service and replacement parts in the country where you will use it.
- Compare complete-tool weight with the battery fitted, not two specifications that exclude a pack or use different capacities.
- Read the exact manual for blade limits, cutting technique, noise, protective equipment and maintenance.
In this comparison the Bosch reference has an identifiable Spanish manufacturer page. That is a documentation advantage for local buyers, not evidence that it cuts better or is a better value. For the Husqvarna, obtain the model code for a kit sold in your country and confirm local battery, charger, warranty and service coverage. If a same-market configuration cannot be documented, compare specifications only and do not treat the result as a regional buying recommendation.
| Your situation | Evidence to prioritize | What not to assume |
|---|---|---|
| You own Bosch batteries | Confirm the exact 36V POWER FOR ALL pack is listed as compatible and decide between bare tool and kit. | That every Bosch 36V pack fits or delivers the same runtime. |
| You own Husqvarna batteries | Identify the BLi-X pack and find a 115iHD55 SKU offered in your country with local service. | That a US/Canada package is the correct regional configuration. |
| Your hedge is long and straight | Consider cutting length and whether you can keep the longer bar controlled for the whole pass. | That a 65 cm blade automatically cuts faster or leaves a better finish. |
| You regularly trim woody branches | Use the exact model manual's documented limit and choose loppers or a saw outside that range. | That tooth opening and maximum cutting diameter are the same measurement. |
| You work for long sessions or overhead | Compare complete-tool weight with the pack installed, balance and posture in a safe grip test. | That a tool-only weight describes the load during use. |
Use this matrix to screen the configuration before comparing discounts: record the exact SKU, battery, charger and complete working weight, then match that combination to the local product page. If the listing is ambiguous between body-only and kit, ask the seller for a package-label photograph or written contents. If the configuration cannot be established, treat the evidence as incomplete even when the main model name looks familiar.
Match the tool to hedge shape and workload
Measure hedge height and depth, identify whether the regular growth is soft or woody, and estimate how long the tool will be held above waist height. On a long, straight hedge, bar length and battery capacity may matter more. Around corners, gates and ornamental shrubs, precise control and sight lines can outweigh extra reach. If the top is beyond a safe standing position, use a purpose-built pole tool or professional service; do not climb a ladder with a running hedge trimmer.
Battery endurance depends on the chosen pack and the hedge, not just the model name. Bosch’s area figure can help narrow options but should not be read as a guaranteed number of metres or hours. For Husqvarna, compare a local manual and battery configuration. Consider whether you can charge and store the pack correctly and whether compatible batteries are available from the local support network.
Timing is a separate horticultural decision. Some flowering shrubs set buds on older growth; trimming at the wrong time can remove next season’s flowers. Identify the plant and consult species-specific pruning guidance before shaping it. A longer blade or a different battery cannot compensate for an incorrect pruning window.
Before each session, inspect the teeth, guard, controls, housing and battery. Remove the pack before cleaning, clearing or lubricating the blades. Wear eye and hearing protection, keep bystanders away and do not force a cut when the motor stalls. A bent blade, new vibration or damaged housing calls for service. Use a pruning saw or loppers for branches outside the documented range.
A fair product recommendation requires same-market configurations and comparable evidence. Until an equivalent Husqvarna kit and a matched test are available, this page is a specification reference rather than a verdict. For broader criteria, read our battery hedge trimmer guide and confirm the selected model's local service and battery support.